(navigation image)
Home American Libraries | Canadian Libraries | Universal Library | Community Texts | Project Gutenberg | Children's Library | Biodiversity Heritage Library | Additional Collections
Search: Advanced Search
Anonymous User (login or join us)
Upload
See other formats

Full text of "Nikon Coolpix 3500 Repair Manual"

Installing Nikon Coolpix 3500 Logic Board 




Installing Nikon Coolpix 3500 Logic Board 



Tools used in this guide 

• Phillips #00 Screwdriver 

• Spudger 




Step 1 - Battery 

• Open the battery cover 

• Remove the battery 

• Gently remove the cover 




Step 2 - front cover 

• Remove two 4.5 mm screws next to the battery opening 
Remove one 3 mm screw above the CF Card opening 

• Remove one 4.5 mm screw next to CF card opening 



©2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 1 of 5 



Installing Nikon Coolpix 3500 Logic Board 




Step 3 

• Remove two 4.5 mm screws from inside the battery slot 




Step 4 

• Remove two 5 mm screws from the end opposite to the 
battery 




Steps 

• Remove the newly revealed 5 mm screw and plastic cap 



©2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 2 of 5 



Installing Nikon Coolpix 3500 Logic Board 




Step 6 

• Remove the five identical 3.5 mm screws from the 
bottom of the camera 

• Remove the grey plastic piece that was held in place 
with the five screws by gently prying the faceplate up 
(Note: do not pull hard, there are two wires connecting 
the faceplate to the logic board) 




Step? 

• Use the spudger to lift up the white-capped wire and set 
the faceplate aside 

• Next, use a spudger, lift up the orange-capped wire at 
the bottom of the camera 



©2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 3 of 5 



Installing Nikon Coolpix 3500 Logic Board 




Step 8 - Logic Board 

• Disconnect the grey-capped wire from the logic board 
Lift the green chip attached to the blue wires 




Step 9 

• Remove the 3.5 mm screw from the logic board next to 
the rotating lens 

• Invert the logic board and lens toward the orange and 
blue wires still connecting the logic board to the LED 
screen 



©2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 4 of 5 



Installing Nikon Coolpix 3500 Logic Board 




Step 10 

• Disconnect the blue wire connecting the logic board to 
the LED screen 

Disconnect the orange wire using a spudger while 
pushing out horizontally 

• Disconnect the red capped wire from the logic board 

• Lift the logic board and lens (still connected) out of the 
back case 







1 


^ 




n 


^ 


^ 


m 


1 
0^ 


^ 


■ 




^ 


^ 






^ ». 


k 


A 


^^^^^m 




mA 


^ _ 


*ik* 


^ 


y^\ 


f ■ 


w^ 


«^^ 


m 


-w. 


k 








^^1 


% 


m 


i 




4 


4 


V\ 


^ 


isBB^^ ' '"X^H 






^ 


^ ^ 


J 


1 


V 1 








M 




r 


fv^B 



Step 11 

• Lift up on the black covering and remove the orange 
wire connecting the lens to the logic board 



©2010 iFixit — CC BY-NC-SA 



www.iFixit.com 



Page 5 of 5